3Com MSR 50, MSR 30 manual DCC Configuration Commands, Dialer bundle-member

20

DCC CONFIGURATION COMMANDS

n Set all synchronous/asynchronous serial interfaces involved in DCC configuration to work in asynchronous mode with the physical-mode async command.

dialer bundle

Syntax dialer bundle number

undo dialer bundle

View Dialer interface view

Parameter number: Dialer bundle number, in the range 1 to 255.

Description Use the dialer bundle command to associate a dialer bundle with a dialer interface in RS-DCC.

Use the undo dialer bundle command to remove the association.

By default, dialer interfaces are not associated with any dialer bundle in RS-DCC.

This command applies only to dialer interfaces. In addition, a dialer interface can be associated with only one dialer bundle.

Related command: dialer bundle-member.

Example # Associate dialer bundle 3 with interface Dialer1.

<Sysname> system-view

[Sysname] interface dialer 1

[Sysname-Dialer1] dialer bundle 3

dialer bundle-member

Syntax dialer bundle-member number [ priority priority ]

undo dialer bundle-member number

View Dial (physical) interface view

Parameter number: Dialer bundle number, in the range 1 to 255.