3Com MSR 50, MSR 30 manual PORT-BASED Vlan Configuration Commands, Port access vlan

PORT-BASED VLAN CONFIGURATION

40 COMMANDS

port

Syntax port interface-list

undo port interface-list

View VLAN interface view

Parameter interface interface-list: Ethernet interface list, in the format of { interface-typeinterface-number[ to interface-typeinterface-number] }&<1-10>, where &<1-10> means that you can specify up to 10 port ranges.

Description Use the port command to add one Access port or a group of Access ports to a VLAN. Use the undo port command to remove one Access port or a group of Access ports from a VLAN.

Note:

■This command is only applicable to Access ports.

■All ports have their default link type configured as Access, however, users can manually configure the port type. For more information, refer to “port link-type” on page 642.

Related command: display vlan.

Example # Add the ports from Ethernet 1/1 to Ethernet 1/3 to VLAN 2.

<Sysname> system-view [Sysname] vlan 2

[Sysname-vlan2] port ethernet 1/1 to ethernet 1/3

port access vlan

Syntax port access vlan vlan-id

undo port access vlan

View Ethernet interface view, port group view

Parameter vlan-id : VLAN ID, in the range 1 to 4094.