3Com MSR 50 Link-protocol fr mfr, Mfr bundle-name, Syntax link-protocol fr mfr interface-number

401

<Sysname> system-view

[Sysname] interface serial 2/0

[Sysname-Serial2/0] link-protocol fr nonstandard

link-protocol fr mfr

Syntax link-protocol fr mfr interface-number

View Interface view

Parameter interface-number: MFR interface number, in the range 0 to 1023.

Description Use the link-protocol fr mfr command to configure the current physical interface as an MFR bundle link and bind it to an MFR interface.

By default, an interface is not bound to any MFR interface.

Note that:

■When this command is configured, the specified MFR interface must exist. A maximum of 16 physical interfaces can be bundled onto an MFR interface.

■To delete a physical interface from an MFR interface, use the link-protocolcommand to apply a link layer protocol of non frame relay MFR to the interface.

■After a physical interface is encapsulated as MFR format, the interface belongs to MFR and is not allowed to be configured using the commands related to FR except MFR. In addition, the queue type on the interface can be configured as FIFO (first in first out) only even if the other queue types have been encapsulated on the interface, they would be converted to FIFO type by force.

Example # Configure Serial 2/0 as a bundle link and add it onto the Frame Relay bundle interface MFR4.

<Sysname> system-view

[Sysname] interface serial 2/0

[Sysname-Serial2/0] link-protocol fr mfr 4

mfr bundle-name

Syntax mfr bundle-name [ name ]

undo mfr bundle-name

View MFR interface view

Parameter name: Bundle identification, a string of 1 to 49 characters.

Description Use the mfr bundle-namecommand to set frame relay bundle identification (BID).