3Com MSR 50, MSR 30 manual Number-match, Related command max-call in voice dial program view

2631

while the latter is used to configure a serial number for a maximum-call-connection set and the maximum number of call connections.

Related command: max-call (in voice dial program view).

Example # Bind voice entity 10 to maximum-call-connection set 1.

<Sysname> system-view [Sysname] voice-setup [Sysname-voice] dial-program [Sysname-voice-dial] max-call 1 5

[Sysname-voice-dial] max-call 1 5

[Sysname-voice-dial] entity 10 voip [Sysname-voice-dial-entity10] max-call 1

number-match

Syntax number-match { longest shortest }

undo number-match

View Voice dial program view

Parameter longest: Matches the longest number. shortest: Matches the shortest number.

Description Use the number-matchcommand to configure a global number match policy.

Use the undo number-matchcommand to restore the default number match policy.

By default, the shortest-number match policy is adopted.

Related command: match-templateon page 2599 and terminator.

n If the longest-number match policy is configured and the rule command with the input-format argument ending in a dollar sign ($) is carried out, after a user dials a number, the system will not look up the voice entity to connect the call until the dialing interval expires. Because the dollar sign ($) requires that the last digit configured should match the last one dialed, the system can determine the last dialed digit only after the dialing interval expires and the system stops collecting digits.

Example # Configure the longest-number match policy.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] dial-program

[Sysname-voice-dial] number-match longest