3Com MSR 50, MSR 30 manual 241, Bert statestopped, not completed

241

Table 20 Description on the fields of the display ft1 serial command

Field	Description
Cable type	Cable type of the interface, 100 ohm balanced in
	this sample output
Frame-format	Frame format configured on the interface: ESF or
	SF
fdl	FDL format: ANSI, ATT, or none
Line code	AMI or B8ZS
Source Clock	Source clock used by the interface: master for the
	internal clock or slave for the line clock
Data-coding	Normal or inverted
Idle code	7e or ff
Itf type	Type of interframe filling tag: 7e or ff
Itf number	Number of interframe filling tags
Loop back	Loopback setting on the interface: local, payload,
	remote, or not set
Alarm State	Alarm state
Receiver alarm state	Type of received alarm: none, LOS, LOF, RAI, or AIS
Transmitter is sending remote alarm.	Type of transmitted alarm: RAI, or none
Pulse density violation detected	The detected pulse density is incompliant with the
	specification

SendLoopCode History:

inband-llb-up:0 times, inband-llb-down:0 times.

fdl-ansi-llb-up:0 times, fdl-ansi-llb-down:0 times.

fdl-ansi-plb-up:0 times, fdl-ansi-plb-down:0 times

BERT state:(stopped, not completed)

History of loopback code sending to the far-end, including the number of transmissions for each type of code, and the type of the last sent code. (See “ft1 sendloopcode” on page 251.)

BERT state: completed, stopped (administratively stopped), or running.

Test pattern: 2^15, Status: Not Sync,	Test pattern in use, 2^15 in this sample output;
Sync Detected: 0	synchronization state, and the number of detected
	synchronizations
Time: 0 minute(s), Time past: 0 minute(s)	The duration of the BERT test and the time that has
	elapsed

Bit Errors (since test started)

Number of bit errors received since the start of the BERT test

Bits Received (since test started)

Number of bits received since the start of the BERT test

Bit Errors (since latest sync)

Number of bit errors received since the last synchronization

Bits Received (since latest sync)	Number of bits received since last synchronization
Historical Statistics:	Historical statistics
Last clearing of counters: Never	Counter clearing records