NETGEAR GS752TP, GS728TPP manual Dual Image Status,  To configure Dual Image settings

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

To configure Dual Image settings:

1.Select Maintenance > File Management > Dual Image > Dual Image Configuration. The following screen displays:

2.In the Image Name field, select one of the images from the list. The Current-active field displays the name of the active image.

3.To configure a descriptive name for the selected software image, type the name in the Image Description field.

The valid range is 0–160 characters.

4.To set the selected image as the active image, select the Activate Image check box.

Note: After activating an image, you must perform a system reset of the switch to run the new code.

5.Click APPLY to apply the settings to the switch.

Dual Image Status

The Dual Image Status screen displays system images.

To display Dual Image settings:

Select Maintenance > File Management > Dual Image > Dual Image Status.

236