NETGEAR DHCP Snooping Configuration Guide for Switches

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

Table 11. DHCP Snooping Dynamic Binding Configuration fields.

Field	Description
Interface	Displays information about the interface to which a binding entry in the
	DHCP snooping database.
MAC Address	The MAC address for the binding entry in the binding database.
VLAN ID	The VLAN for the binding entry in the binding database. The valid range
	of the VLAN ID is 1–4093.
IP Address	The IP address for the binding entry in the binding database.
Lease Time	The remaining lease time for the dynamic binding entries.

DHCP Snooping Persistent Configuration

To configure DHCP snooping persistent settings:

1.Select System > Services > DHCP Snooping > Persistent Configuration. The following screen displays:

2.Next to the Local Store, select Enable or Disable to determine if the binding table is stored locally.

3.In the Write Delay field, enter the maximum write time to write to the database locally, in seconds. The valid range is 600–86400.

4.Click APPLY to apply the change to the system. Configuration changes take effect immediately.

71