GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

DHCP Snooping Binding Configuration

To configure DHCP binding settings:

1.Select System > Services > DHCP Snooping > Binding Configuration. The following screen displays:

2.In the Static Binding Configuration section, in the Interface list, select the interface for which to add a binding to the DHCP snooping database.

3.In the MAC Address field, specify the MAC address for the binding to be added. This MAC address is the key to the binding database.

4.In the VLAN ID list, select the VLAN from the list for the binding rule. The valid range of the VLAN ID is 1–4093.

5.In the IP Address field, specify a valid IP address for the binding rule.

6.Click ADD to add the DHCP snooping binding entry to the database.

7.Click APPLY to apply the change to the system. Configuration changes take effect immediately.

Click DELETE to delete selected DHCP snooping binding static entries from the database, or CLEAR to delete all DHCP snooping binding entries from the database.

The following table describes the information that displays for DHCP Snooping Dynamic Binding Configuration:

70

Page 70
Image 70
NETGEAR GS728TPP, GS752TP manual Dhcp Snooping Binding Configuration,  To configure Dhcp binding settings