NETGEAR GS752TP Accounting Server Configuration,  To configure the Radius accounting server

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

Accounting Server Configuration

Use the Accounting Server Configuration screen to view and configure various settings for a RADIUS accounting server on the network.

To configure the RADIUS accounting server:

1.Select Security > Management Security > RADIUS > Accounting Server Configuration. The following screen displays:

2.In the Accounting Server Address field, specify the IP address of the RADIUS accounting server to use.

3.In the Port field, specify the UDP port number the server uses to verify the RADIUS accounting server authentication.

The valid range is 0–65535. The default port for RADIUS accounting is UDP 1813.

4.From the Secret Configured list, select Yes to add a RADIUS secret in the next field.

You must select Yes before you can configure the RADIUS secret. After you add the RADIUS accounting server, this field indicates whether the shared secret for this server has been configured.

5.In the Secret field, type the shared secret to use with the specified RADIUS accounting server.

6.From the Accounting Mode list, enable or disable the RADIUS accounting mode.

7.Click APPLY to update the switch with the RADIUS Accounting server settings.

162