GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

To create an ACL:

1.Select Security > ACL > ACL Wizard. The following screen displays:

2.From the ACL Type list, select the ACL type used to create the ACL. You can select from 10optional types:

ACL Based on Destination MAC. Creates an ACL based on the destination MAC address, destination MAC mask, and VLAN.

ACL Based on Source MAC. Creates an ACL based on the source MAC address, source MAC mask, and VLAN.

ACL Based on Destination IPv4. Creates an ACL based on the destination IPv4 address and IPv4 address mask.

ACL Based on Source IPv4. Creates an ACL based on the source IPv4 address and IPv4 address mask.

ACL Based on Destination IPv6. Creates an ACL based on the destination IPv6 prefix and IPv6 prefix length.

ACL Based on Source IPv6. Creates an ACL based on the source IPv6 prefix and IPv6 prefix length.

ACL Based on Destination IPv4 L4 Port. Creates an ACL based on the destination IPv4 layer 4 port number.

ACL Based on Source IPv4 L4 Port. Creates an ACL based on the source IPv4 layer 4 port number.

ACL Based on Destination IPv6 L4 Port. Creates an ACL based on the destination IPv6 layer 4 port number.

188

Page 188
Image 188
NETGEAR GS752TP, GS728TPP manual  To create an ACL