GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

LLDP Configuration

Use the LLDP Configuration screen to specify LLDP and LLDP-MED parameters that are applied to the switch.

To configure global LLDP settings:

1.Select System > LLDP > Basic > LLDP Configuration. The following screen displays:

Note: You can also access the LLDP Configuration screen by selecting

System > LLDP > Advanced > LLDP Configuration.

2.Configure the following LLDP settings:

TLV Advertised Interval. Specify the interval at which frames are transmitted. The default is 30 seconds, and the valid range is 5–32768 seconds.

Hold Multiplier. Specify multiplier on the transmit interval to assign to Time-to-Live (TTL). The default is 4, and the range is 2–10.

Reinitializing Delay. Specify the delay before a reinitialization. The default is 2 seconds, and the range is 1–10 seconds.

Transmit Delay. Specify the interval for the transmission of notifications. The default is 5 seconds, and the range is 5–3600 seconds.

3.To change the LLDP-MED properties in the Fast Start Duration field, specify the number of LLDP packets sent when the LLDP-MED Fast Start mechanism is initialized.

56

Page 56
Image 56
NETGEAR GS752TP, GS728TPP manual  To configure global Lldp settings, System Lldp Advanced Lldp Configuration