NETGEAR GS752TP, GS728TPP manual LAG Membership,  To create a LAG

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

4.Click APPLY to send the updated configuration to the switch. Configuration changes take effect immediately.

LAG Membership

Use the LAG Membership screen to select two or more full-duplex Ethernet links to aggregate together to form a link aggregation group (LAG), which is also known as a port-channel. The switch can treat the port channel as if it were a single link.

To create a LAG:

1.Select Switching > LAG > Basic > LAG Membership. The following screen displays:

2.From the LAG ID field, select the LAG to configure.

The LAG Name field, shows the name assigned to the LAG. The values are ch1, ch2,..., and ch8.

3.Click Port in the orange bar to display the ports.

78