NETGEAR GS728TPP, GS752TP manual  To modify an MST instance

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

The following screen displays:

2.To add an MST instance, configure the MST values and click Add:

•MST ID. Specify the ID of the MST to create. The valid range is 1–15.

•Priority. Specify the bridge priority value for the MST. When switches or bridges are running STP, each is assigned a priority. After exchanging BPDUs, the switch with the lowest priority value becomes the root bridge. The bridge priority is a multiple of 4096. If you specify a priority that is not a multiple of 4096, the priority is automatically set to the next lowest priority that is a multiple of 4096. For example, if you set the priority to any value from 0 through 4095, the priority is set to 0. The default priority is 32768.The valid range is 0–61440.

•VLAN ID. The list contains all VLANs configured on the switch. Select a VLAN to associate with the MST instance.

3.Click APPLY to send the updated configuration to the switch. Configuration changes take place immediately.

To modify an MST instance:

1.Select the check box next to the instance to configure and update the values.

You can select multiple check boxes to apply the same setting to all selected MTS instances.

2.Click APPLY to send the updated configuration to the switch. Configuration changes take place immediately.

To delete an MST instance, select the check box next to the instance and click DELETE.

100