GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

•Disable. All frames are forwarded in accordance with the IEEE 802.1Q VLAN standard. The factory default is Disable.

6.Specify the default 802.1 p priority assigned to untagged packets arriving at the port. Possible values are 0–7.

7.Click APPLY to send the updated configuration to the switch. Configuration changes take effect immediately.

Voice VLAN

Configure the Voice VLAN settings for ports that carry traffic from IP phones. The voice VLAN feature can help ensure that the sound quality of an IP phone is safeguarded from deteriorating when the data traffic on the port is high.

The following are two operational modes for IP phones:

•IP phones are configured with VLAN mode enabled, ensuring that the phone uses tagged packets for all communications.

•IP phones are configured with VLAN mode disabled, ensuring that the phone uses untagged packets for all communications. The phone uses untagged packets while retrieving the initial IP address through DHCP. The phone eventually uses the voice VLAN and commences sending tagged packets.

From the Voice VLAN menu, you can access the features described in the following sections:

•Voice VLAN Properties

•Voice VLAN Port Setting

•Voice VLAN OUI

Voice VLAN Properties

To configure Voice VLAN:

1. Select Switching > Voice VLAN > Basic > Properties.

86

Page 85 Page 87
Page 86
Image 86
NETGEAR GS752TP, GS728TPP manual Voice Vlan Properties
Page 85 Page 87
Top Page Image Contents