NETGEAR GS728TPP, GS752TP manual  To configure a class

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

Use the buttons at the bottom of the screen to perform the following:

•To remove a class, select the check box beside the class name, then click DELETE.

•To cancel the configuration you just entered, click CANCEL.

To configure a class:

1. Select QoS > DiffServ > Advanced > IPv6 Class Configuration. The following screen displays:

2.Click a class name (which is a hyperlink) for an existing class.

When you click a class name, the configuration part of the Class Configuration screen is displayed. In this part of the screen, you define against which values traffic is checked when this class is applied.

3.To define the criteria to associate with a DiffServ class, select one or more of the following check boxes and enter the following data:

•Match Every. Select All to add a match condition to the specified class definition whereby all packets are considered to belong to the class. In this case, no other field can be configured.

•Class of Service. Select a Class of Service 802.1 p user priority value to be matched.

•VLAN. Select a VLAN ID to be matched.

•Ethernet Type. Select an Ethernet type from the list, or select User Value and add a value.

148