NETGEAR GS728TPP, GS752TP manual  To configure VLANs

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

To configure VLANs:

1.Select Switching > VLAN > Basic > VLAN Configuration. The following screen displays:

2.To add a VLAN, configure the VLAN ID, name, and type, and click ADD. You have the following options:

•VLAN ID. Specify the VLAN identifier for the new VLAN. You can enter data in this field only when you are creating a VLAN. The range of the VLAN ID is 2–4093.

•VLAN Name. Use this optional field to specify a name for the VLAN. It can be up to 32 alphanumeric characters long, including blanks. The default is blank. VLAN ID 1 is always named Default.

•VLAN Type. This field identifies the type of the VLAN you are configuring. You cannot change the type of the default VLAN (VLAN ID = 1) because the type is always Default. When you create a VLAN on this screen, its type is Static. Voice VLAN (2) and Auto-Video VLAN (3) are created by default.

3.To modify settings for a VLAN, select the check box next to the VLAN ID, change the desired information, and click APPLY.

Configuration changes take effect immediately.

To reset VLAN settings on the switch to the factory defaults:

1.Select the Reset Configuration check box

2.Click OK in the pop-up message to confirm the operation.

If the Management VLAN is set to a non-default VLAN (VLAN 1), it is automatically set to 1 after you reset the VLAN configuration.

82