NETGEAR GS752TP, GS728TPP manual MLD Vlan Configuration,  To configure the MLD Vlan

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

MLD VLAN Configuration

MLD snooping can be enabled on a per-VLAN basis. It is necessary to keep track of the interfaces that are participating in a VLAN in order to apply or remove configurations.

To configure the MLD VLAN:

1.Select Switching > Multicast > MLD Snooping > MLD VLAN Configuration. The following screen displays:

2.In the VLAN ID field, select the VLAN IDs for which MLD snooping is enabled.

3.In the Admin Mode field, enable MLD Snooping for the specified VLAN ID.

4.In the Fast Leave Admin Mode field, enable or disable the MLD Snooping Fast Leave mode for the specified VLAN ID.

5.In the Group Membership Interval field, enter the value for the group membership interval of MLD Snooping for the specified VLAN ID.

The value is calculated as the Multicast Router Expiry Time + ½ Maximum Response Time.

6.In the Maximum Response Time field, set the value for maximum response time of MLD snooping for the specified VLAN ID.

The valid range is 1–20 seconds.

7.In the Multicast Router Expiry Time field, enter the value for multicast router expiry time of MLD snooping for the specified VLAN ID.

The valid range is 3 – 3610 seconds. This value is calculated as: 2 * QI + ½ Maximum Response Time, where:

117