NETGEAR GS752TP, GS728TPP manual Vlan Membership Configuration,  To configure Vlan membership

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

VLAN Membership Configuration

Use this screen to configure VLAN port membership for a particular VLAN. You can select the Group Operation through this screen.

To configure VLAN membership:

1.Select Switching > VLAN > Advanced > VLAN Membership. The following screen displays:

2.From the VLAN ID list, select the VLAN to which you want to add ports.

3.Click the orange bar below the VLAN Type field to display the physical ports on the switch.

4.Click the lower orange bar to display the LAGs on the switch.

5.To select the ports or LAGs to add to the VLAN, click the square below each port or LAG.

You can add each interface as a tagged (T) or untagged (U) VLAN member. A blank square means that the port is not a member of the VLAN.

•Tagged. Frames transmitted from this port are tagged with the port VLAN ID.

•Untagged. Frames transmitted from this port are untagged. Each port can be an untagged member of only one VLAN. By default, all ports are untagged members of VLAN 1.

83