GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

Traffic Control

From the Traffic Control menu, you can configure MAC filters, storm control, port security, and protected port settings.

The Traffic Control folder contains links to features described in the following sections:

Storm Control

Port Security Interface Configuration

Security MAC Address

Protected Ports

Storm Control

A broadcast storm is the result of an excessive number of broadcast messages simultaneously transmitted across a network by a single port. Forwarded message responses can overload network resources and cause the network to time out.

The switch measures the incoming broadcast, multicast, and unknown Unicast packet rate per port and discards packets when the rate exceeds the defined value. You enable storm control per interface by defining the packet type and the rate at which the packets are transmitted.

Storm control is configured as a percent of the maximum port speed, which is 1000 M for all ports.

182

Page 182
Image 182
NETGEAR GS752TP, GS728TPP manual Traffic Control, Storm Control