NETGEAR GS752TP, GS728TPP manual Protected Ports,  To configure protected ports

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

Table 24. Dynamic MAC addresses table fields.

Field	Description
VLAN ID	The VLAN ID corresponding to the last violation MAC address.
MAC Address	The MAC addresses learned on a specific port.

Protected Ports

If a port is configured as protected, it does not forward traffic to any other protected port on the switch, but it forwards traffic to unprotected ports. Use the Protected Ports screen to configure the ports as protected or unprotected.

To configure protected ports:

1.Select Security > Traffic Control > Protected Ports. The following screen displays:

2.Click the orange bar to display the available ports.

3.Click the box below each port to configure it as a protected port.

Protected ports are marked with a √. No traffic forwarding is possible between two protected ports.

4.Click APPLY to update the switch with the new settings. Configuration changes take effect immediately.

186