189
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
•ACL Based on Source IPv6 L4 Port. Creates an ACL based on the source IPv6
layer 4 port number.
3. Configure the settings in the following table, based on the selection in the ACL Type list:
Note: The Rule ID, Action, and Match Every fields appear for all ACL
types. The remaining two fields vary according to the selected ACL
type.
•In the Rule ID field, enter a number that is used to identify the rule. The valid range is
1 - 10.
•In the Action field, specify what action must be taken if a packet matches the rule's
criteria. The choices are Permit or Deny.
•In the Match Every field, specify True or False.
•In the remaining two fields, specify data according to Table 25.
Table 25. ACL fields according to selected ACL type.
ACL Based on Fields
Destination MAC • Destination MAC. Specify the destination MAC address to compare against an
ethernet frame. The valid format is (xx:xx:xx:xx:xx:xx). The BPDU keyword
might be specified using a destination MAC address of 01:80:C2:xx:xx:xx.
•Destination MAC Mask. specify the destination MAC address mask specifying
which bits in the destination MAC to compare against an ethernet frame. The
valid format is (xx:xx:xx:xx:xx:xx). The BPDU keyword might be specified using
a destination MAC mask of 00:00:00:ff:ff:ff.
Source MAC • Source MAC. Specify the source MAC address to compare against an ethernet
frame. The valid format is (xx:xx:xx:xx:xx:xx).
•Source MAC Mask. Specify the source MAC address mask specifying which
bits in the source MAC to compare against an ethernet frame. Valid format is
(xx:xx:xx:xx:xx:xx).
Destination IPv4 • Destination IP Address. Specify the destination IP address.
•Destination IP Mask. Specify the destination IP address mask.
Source IPv4 • Source IP Address. Specify the source IP address.
•Source IP Mask. Specify the source IP address mask.
Destination IPv6 • Destination Prefix. Specify the destination prefix.
•Destination Prefix Length. Specify the destination prefix length.
Source IPv6 • Source Prefix. Specify the source destination prefix.
•Source Prefix Length. Specify the source prefix length.
Destination IPv4 L4
Port
•Destination L4 port (protocol). Specify the destination IPv4 L4 port protocol.
•Destination L4 port (value). Specify the destination IPv4 L4 port value.