Figure 19. Removing and installing the cable retention bracket
1. alignment pin (2) 2. tab
3. cable retention bracket
1. Follow the procedure listed in After working inside your system.
Installing the cable retention bracket
1. Ensure that you read the Safety instructions.
2. Follow the procedure listed in Before working inside your system.
3. Remove the cooling shroud.
4. Remove the PCIe card holder.
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Align the cable retention bracket with the alignment pins on the chassis.
2. Slide the cable retention bracket along the chassis wall until the tab clicks and locks the slots.
3. Place all cables to be routed in the cable retention bracket.
1. Install the PCIe card holder.
2. Install the cooling shroud.
3. Follow the procedure listed in After working inside your system.
47