4.If the driver is installed, ensure you are not connected to any network through WiFi or cabled ethernet as iDRAC Direct uses a non-routable address.

Troubleshooting a serial I/O device

1.Turn off the system and any peripheral devices connected to the serial port.

2.Swap the serial interface cable with a working cable, and turn on the system and the serial device. If the problem is resolved, replace the interface cable with a known good cable.

3.Turn off the system and the serial device, and swap the serial device with a comparable device.

4.Turn on the system and the serial device.

Troubleshooting a NIC

1.Run the appropriate diagnostic test. See Using System Diagnostics for available diagnostic tests.

2.Reboot the system and check for any system messages pertaining to the NIC controller.

3.Check the appropriate indicator on the NIC connector:

If the link indicator does not light, check all cable connections.

If the activity indicator does not light, the network driver files might be damaged or missing. Remove and reinstall the drivers if applicable. See the NIC's documentation.

If applicable, change the autonegotiation setting.

Use another connector on the switch or hub.

4.Ensure that the appropriate drivers are installed and the protocols are bound. See the NIC's documentation.

5.Enter the System Setup and confirm that the NIC ports are enabled on the Integrated Devices screen.

6.Ensure that the NICs, hubs, and switches on the network are all set to the same data transmission speed and duplex. See the documentation for each network device.

7.Ensure that all network cables are of the proper type and do not exceed the maximum length.

Troubleshooting a wet system

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1.Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.

2.Remove the system cover.

3.Remove the following components from the system:

hard drives

hard-drive backplane

USB memory key

hard-drive tray

cooling shroud

expansion-card risers (if present)

97

Page 97
Image 97
Dell 7910 owner manual Troubleshooting a serial I/O device, Troubleshooting a NIC, Troubleshooting a wet system

7910 specifications

The Dell Precision series has long been a trusted choice for professionals in fields such as engineering, architecture, and data analysis. Among these workstations, the Dell Precision 7910, 7810, and 5810 stand out as robust solutions tailored to meet demanding computational tasks.

The Dell Precision 7910 is renowned for its exceptional scalability and performance. Designed to handle the most intensive workloads, it features dual Intel Xeon processors that offer powerful multi-core performance. This workstation can support up to 1TB of DDR4 memory, enabling users to work with massive datasets seamlessly. With multiple PCIe slots and support for NVIDIA Quadro graphics, the 7910 is ideal for professionals engaging in 3D modeling, simulation, and complex data analysis. The system’s flexible storage options include SSDs and conventional hard drives, ensuring rapid data access and storage capacity.

Next in line, the Dell Precision 7810 offers a slightly more compact solution without compromising on effectiveness. This workstation also supports dual Intel Xeon processors, providing high performance, though typically with fewer cores compared to the 7910. It can accommodate up to 512GB of DDR4 memory, making it suitable for a wide range of professional applications. The 7810 features a refined thermal design that ensures efficient cooling under load, extending the life of the components while maintaining peak performance. The graphics capabilities align with the 7910, supporting high-end NVIDIA Quadro cards for graphic-intense tasks.

The Dell Precision 5810 is the entry point of this powerful trio but still offers formidable capabilities. It supports a single Intel Xeon processor, which is powerful enough for many professional tasks, providing an excellent balance of performance and cost. The 5810 also supports up to 256GB of DDR4 memory, making it suitable for medium to moderately demanding applications. With dedicated graphics options from the NVIDIA lineup, the 5810 is an excellent choice for professionals needing reliable performance for engineering simulations or graphic design.

In summary, the Dell Precision 7910, 7810, and 5810 provide a range of features tailored to meet the needs of professionals requiring high performance and reliability. With options for dual processors, substantial RAM, and powerful graphics capabilities, these workstations deliver exceptional performance in demanding environments. Whether you are a designer, engineer, or data scientist, these systems are designed to efficiently handle complex tasks, ensuring that you can focus on delivering results. Each model offers a unique blend of characteristics that cater to different workload intensities, allowing users to select the ideal workstation for their specific needs.