NETGEAR GS728TP, GS752TP manual ARP Entry Configuration,  To add a static entry to the ARP table

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

ARP Entry Configuration

To add a static entry to the ARP table:

1.Select Routing > ARP > Advanced > ARP Create. The following screen displays:

2.In the IP Address field, specify the IP address that you want to add.

It must be the IP address of a device on a subnet attached to one of the switch's existing routing interfaces.

3.In the MAC Address field, specify the unicast MAC address of the device.

The format is six 2-digit hexadecimal numbers separated by colons, for example 00:06:29:32:81:40.

4.Click ADD to add the static entry to the switch configuration.

To delete a static entry from the ARP cache, select DELETE.

The static entries for the switch are displayed in the Routing VLANs ARP Cache Table.

134