NETGEAR GS728TPP, GS752TP manual Switch Features and Defaults, Feature Sets Supported Default

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

Switch Features and Defaults

Feature	Sets Supported	Default
Auto negotiation/static	All ports	Auto-negotiation
speed/duplex
Auto MDI/MDIX	N/A	Enabled
802.3x flow control/back pressure	1 (per system)	Disabled
Port mirroring	1 destination port and 8 source	Disabled
	ports
Port trunking (aggregation)	8	Pre-configured
802.1D spanning tree	1	Disabled
802.1w RSTP	1	Disabled
802.1s spanning tree	16 instances	Disabled
Static 802.1Q tagging	256	VID = 1
		Max. member ports are:
		52 for standalone switch
Learning process	Supports static and dynamic MAC	Dynamic learning is enabled by
	entries	default
Storm control	All ports	Disabled
Jumbo frame	All ports	Disabled
		Max.= 9 Kb
Number of queues	4	N/A
Port based	N/A	N/A
802.1p	1	Enabled
DSCP	1	Disabled
Rate limiting	All ports	Disabled
Auto-QoS	All ports	Disabled
802.1x	All ports	Disabled
MAC ACL	480 (shared with IP and IPv6	All MAC addresses allowed
	ACLs)
IP ACL	480 (shared with MAC and IPv6	All IP addresses allowed
	ACLs)
IPv6 ACL	480 (shared with IP ACL and MAC	All IP addresses allowed
	ACL)

250