NETGEAR GS752TP, GS728TPP manual  To configure an IPv6 class

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

To configure an IPv6 class:

1.Select QoS > DiffServ > Advanced > IPv6 Class Configuration. The following screen displays:

2.Enter the new class name.

3.Select the class type, and click Add.

The switch supports only the Class Type value All, which means all the various match criteria defined for the class must be satisfied for a packet match. All signifies the logical AND of all the match criteria.

4.Click APPLY to save the class. Configuration changes take effect immediately.

5.To configure this class, proceed to To configure an IPv6 class: on page 150.

150