NETGEAR GS728TPP, GS752TP manual ARP Entry Management,  To remove entries from the ARP table

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

ARP Entry Management

Use this screen to remove entries from the ARP Table.

To remove entries from the ARP table:

1.Select Routing > ARP > Advanced > ARP Entry Management. The following screen displays:

2.In the Remove From Table field, select the ARP entries to remove. The following are ARP entries then can be removed:

•All Dynamic Entries. Remove the dynamic entries from the ARP table.

•All Static Entries. Remove the dynamic entries from the ARP table.

•All Entries. Remove all static and dynamic entries from the ARP table.

•Specific Entry. Remove a specific ARP entry from the ARP table. If you select Specific Entry in the Remove from Table list, you can enter the IP address of an entry to remove from the ARP table.

•None. Select if you do not want to delete any entry from the ARP Table.

3.Click APPLY to send the updated configuration to the switch. Configuration changes take place immediately.

136