NETGEAR GS728TP Igmp Snooping Querier Vlan Configuration,  To configure Querier Vlan settings

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

The Querier Expiry Interval specifies the time interval in seconds after which the last querier information is removed. The Query Expiry Interval is a read-only parameter calculated as: 2 * Query Interval + 5, so by default the value is: 2*60+5 =125.

6.Click APPLY to send the updated configuration to the switch. Configuration changes take place immediately.

IGMP Snooping Querier VLAN Configuration

Use this screen to configure IGMP queriers for use with VLANs on the network.

To configure Querier VLAN settings:

1.Select Switching > Multicast > IGMP Snooping Querier > Querier VLAN Configuration. The following screen displays:

2.To create a VLAN ID for IGMP Snooping, select New Entry from the VLAN ID list and complete the following fields:

•VLAN ID. Specifies the VLAN ID for which the IGMP snooping querier is to be enabled.

•Querier Election Participate Mode. Enable or disable querier participate mode.

•Disabled. Upon seeing another querier of the same version in the VLAN, the snooping querier moves to the non-querier state.

•Enabled. The snooping querier participates in querier election, in which the least IP address operates as the querier in that VLAN. The other querier moves to non-querier state.

•Snooping Querier VLAN Address. Specify the snooping querier IP address to be used as the source address in periodic IGMP queries sent on the specified VLAN.

113