NETGEAR GS728TP manual CoS Interface Configuration,  To configure CoS settings for an interface

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

CoS Interface Configuration

Use the CoS Interface Configuration screen to apply an interface shaping rate to all interfaces or to a specific interface.

To configure CoS settings for an interface:

1.Select QoS > CoS > Advanced > CoS Interface Configuration. The following screen displays:

2.Select the type of interface for CoS settings to be configured:

To configure CoS settings for a physical port, link aggregation group (LAG), or both, click PORTS, LAGS or ALL, respectively.

3.Select the check box next to the interface to configure.

You can select multiple ports and LAGs to apply the same setting to the selected interfaces.

The Interface Trust Mode field displays whether the selected interfaces trust a particular packet marking when the packet enters the port. The data for all the ports is taken from the Global Trust Mode.

•Untrusted. Do not trust any CoS packet marking at ingress.

•802.1p or DSCP. Apply the global trust mode set in the CoS configuration.

4.In the Interface Shaping Rate field, specify the maximum bandwidth allowed.

This specification is typically used to shape the outbound transmission rate in this range of 64–1000000 Kbps. The shaping rate (Kb) value is the value of the interface shaping rate configured. The default value is 0. The value 0 means that the maximum is unlimited.

140