NETGEAR GS752TP, GS728TPP manual Hardware Specifications and Default Values

A. Hardware Specifications and Default		A
	Values

The GS752TP, GS728TP, and GS728TPP switches conform to the TCP/IP, UDP, HTTP, ICMP, TFTP, DHCP, IEEE 802.1D, IEEE 802.1 p, and IEEE 802.1Q standards.

They also conform to the IEEE802.3i (10BASE-T), IEEE802.3ii (100Base-TX), IEEE802.3ab (1000Base-T), IEEE802.3z (1000Base-X), IEEE802.3af (DTE Power via MDI), IEEE802.3at (DTE Power via MDI Enhancements), and IEEE802.3az (EEE) standards.

Feature	Value
Interfaces	24 or 48 10/100/1000 Mbps switching ports
	GS752TP. The first eight ports are PoE+ (Power over Ethernet)
	providing 30W of DC power, and the remaining ports are PoE providing
	15.4W of DC power.
	GS728TPGS728TP. The first eight ports are PoE+ providing 30W of
	DC power, and the remaining ports are PoE providing 15.4W of DC
	power.
	GS728TPP. All 24 ports are PoE+ providing 30W of DC power. This
	model includes an external power supply to support the increased
	power requirements.
	Four 100/1000M SFP ports (port 25–29 or 49–52) to support optical
	module
Flash memory size	32 MB
SDRAM size and type	128 MB DDR2
Feature	Value
Switching capacity	Non blocking Full Wire Speed on all packet sizes
Forwarding method	Store and Forward
Packet forwarding rate	10M: 14,880 pps
	100M: 148,810 pps
	1G: 1,488,000 pps

248