NETGEAR GS752TP, GS728TPP manual Https Authentication List

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

Note: Each authentication protocol can use up to three authentication methods. Local and None must be the last methods. You cannot configure methods after these two options.

4.From the list in the 2 column, select the authentication method, if any, that must appear second in the selected authentication login list.

Use this method if the first method times out.

If you select a method that does not time out as the second method, the third method is not tried. This parameter does not appear when you first create a login list.

5.From the list in the 3 column, select the authentication method, if any, that must appear third in the selected authentication login list.

This parameter does not appear when you first create a login list.

6.Click APPLY to update the switch with the HTTP Authentication settings.

HTTPS Authentication List

Use the HTTPS Authentication List to configure the default HTTPS login list.

To change the HTTPS authentication method for the default list:

1.Select Security > Management Security > Authentication List > HTTPS Authentication List.

The following screen displays:

2.Select the check box next to the List name.

167