NETGEAR GS752TP, GS728TPP Factory Default,  To reset the switch to the factory default settings

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

Factory Default

Use the Factory Default screen to reset the system configuration to the factory default values.

Note: If you reset the switch to the default configuration, the IP address is reset to 192.168.0.239, and the DHCP client is enabled. If you loose network connectivity after you reset the switch to the factory defaults, see Connect the Switch to the Network .

To reset the switch to the factory default settings:

1.Select Maintenance > Reset > Factory Default. The following screen displays:

2.Select the check box.

3.Click APPLY.

The switch resets immediately.

228