NETGEAR GS728TP, GS728TPP, GS752TP

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

To configure SNMPv3 settings for the user account:

1. Select System  SNMP  SNMP V3  User Configuration.

The following screen displays:

2. Next to Authentication Protocol, select the SNMPv3 Authentication Protocol setting for the

selected user account. The valid authentication protocols are None, MD5, or SHA.

•None. The user is unable to access the SNMP data from an SNMP browser.

•MD5 or SHA. The user login password is used as SNMPv3 authentication password,

and you must therefore specify a password. The password must be eight characters

in length.

3. Next to Encryption Protocol, select whether to encrypt SNMPv3 packets transmitted by the

switch.

•None. Do not encrypt the contents of SNMPv3 packets transmitted from the switch.

•DES. Encrypt SNMPv3 packets using the DES encryption protocol.

4. If you selected DES for the Encryption Protocol, enter the SNMPv3 encryption key in the

Encryption Key field. Otherwise, this field is ignored. Valid keys are 0–15 characters long.

5. Click APPLY.

Configuration changes take effect immediately.