NETGEAR GS752TP, GS728TPP manual  To configure the global settings for an IPv6 Interface

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

To configure the global settings for an IPv6 Interface:

1.Select System > Management > IPv6 Network Configuration. The following screen displays:

2.In the Global Configuration Section, configure the following:

•Admin Mode. Enable or disable the IPv6 network interface on the switch. The default value is Enable.

•IPv6 Address Auto Configuration Mode. The IPv6 address for the IPv6 network interface is automatically configured if this option is enabled. The default value is Disable.

•IPv6 Gateway. Specify the gateway for the IPv6 network interface. The gateway address is in IPv6 global or link-local address format.

3.Click APPLY to apply the changes to the system.

To modify IPv6 addresses on the network interface:

1.Select System > Management > IPv6 Network Configuration.

2.in the IPv6 Network Interface Configuration section, configure the following:

•IPv6 Prefix/Prefix Length. Select an existing IPv6 prefix and prefix length from the list, or add a new IPv6 prefix and prefix length to the list of IPv6 addresses. The address is in the global address format.

•EUI64. Specify whether the IPv6 address is in EUI-64 format. The default value is False.

3.Click ADD to add a new IPv6 address, or click DELETE to delete a selected IPv6 address from the list of IPv6 addresses.

4.Click APPLY to apply the changes to the system.

30