NETGEAR GS752TP, GS728TPP manual Dscp to Queue Mapping,  To map Dscp values to queues

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

Traffic classes go from low (0) to high (3). For example, traffic with a priority of 0 is for most data traffic and is sent using best effort. Traffic with a higher priority, such as 3, might be time-sensitive traffic, such as voice or video.

3.Click APPLY to apply the changes to the system.

DSCP to Queue Mapping

Use the DSCP to Queue Mapping screen to specify which internal traffic class to map to the corresponding DSCP value.

To map DSCP values to queues:

1.Select QoS > CoS > Advanced > DSCP to Queue Mapping. The following screen displays:

2.For each DSCP value, select a hardware queue to associate with the value.

The traffic class is the hardware queue for a port. Higher traffic class values indicate a higher queue position. Before traffic in a lower queue is sent, it must wait for traffic in higher queues to be sent. The valid range is 0–3.

3.Click APPLY to apply the changes to the system.

143