Spare parts list, Overview | Conair CMA-79 specs

CONAIR

MARTIN

8.Spare parts list

8.1Overview

Only use spare parts from CONAIR MARTIN when replacing machine parts. Orders should go to the representative in the country where the machine was purchased.

When ordering, the following should be specified:

•machine designation, as specified on the machine plate

•serial number, as specified on the machine plate

•article number, as specified in the spare parts list

•quantity, as specified in this spare parts list.

Each module illustrates a particular part of the granulator.

The granulator is divided into the following modules:

		Page
8.1.1a	79, Diagram	19
8.1.1b	79, Table	20
8.1.2	79, Knives, fixed and rotating	21

0 5 - 1 5 - 9 6

7 9

18

Image 18

Conair CMA-79 manual Spare parts list, Overview

Contents

Manual Contents Introduction Data Technical specificationsDimensions Serial Number Functional description Overview Safety system Safety regulations = WARNING! Risk of being cut or caught in the machinery Two hours after first start InstallationPre-start checks Opening and closing the hopper and screenbox Electrical connection Hopper Inspection Operation and daily maintenanceStarting and stopping Daily inspection Or at least once every 300 hours CleaningTrouble-shooting If the granulator does not start Servicing Changing the knivesChanging the fixed and rotating knives Assembling the rotating knives Assembling the upper fixed knife Sharpening the fixed and rotating knives Sharpening the knivesOverview Fixed knives Rotating knives Disassembling/assembling the screw DisassemblingAssembling Lubrication Spare parts list 1a 79, Diagram 1b 79, Table Pos Qty 2 79, Knives, fixed and rotating Electrical scheme Layout Options 11.1.1 79, Air-veyor Pause/pulse relay when emptying with Air-veyor Delay time interval T2 the time Setting the sensitivity Level control, capacitive Transporting and storing Storing