Level control, capacitive, Setting the sensitivity | Conair CMA-79

CONAIR

MARTIN

11.1.3Level control, capacitive

Pos. Qty. Part no.

1 1 9-10527

Setting the sensitivity

•Pull out the granule bin and fill it to the desired level.

•On the back of the capacitive level control there is a trimming screw. Turn this until the LED just lights up.

•Turn the trimming screw back so that the LED just goes out. The sensivity is then set.

•Empty and replace the granule bin and connect the air-veyor's nozzle.

0 5 - 1 5 - 9 6

7 9

27

Image 27

Conair CMA-79 manual Level control, capacitive, Setting the sensitivity

Contents

Manual Contents Introduction Serial Number Technical specificationsDimensions Data Overview Functional description Safety system = WARNING! Risk of being cut or caught in the machinery Safety regulations Opening and closing the hopper and screenbox InstallationPre-start checks Two hours after first start Hopper Electrical connection Daily inspection Operation and daily maintenanceStarting and stopping Inspection If the granulator does not start CleaningTrouble-shooting Or at least once every 300 hours Servicing Changing the knivesChanging the fixed and rotating knives Assembling the upper fixed knife Assembling the rotating knives Fixed knives Sharpening the knivesOverview Sharpening the fixed and rotating knives Rotating knives Disassembling/assembling the screw DisassemblingAssembling Lubrication Spare parts list 1a 79, Diagram Pos Qty 1b 79, Table 2 79, Knives, fixed and rotating Electrical scheme Layout Options 11.1.1 79, Air-veyor Delay time interval T2 the time Pause/pulse relay when emptying with Air-veyor Level control, capacitive Setting the sensitivity Storing Transporting and storing