CONAIR
MARTIN
05-15-96 79 3
1. Introduction
This manual is for CONAIR MARTIN'S 79 granulators, where
A = Screw feed (Auger)
This manual must be studied carefully before installing and using the
equipment, in order to prevent personal injury and damage to the
machinery.
Always take great care when the knives are within reach,
since they are very sharp and can cause personal injury.
CONAIR MARTIN granulators are built for granulation of injection moulded,
blow moulded or extruded plastic waste where the granulator’s size and
performance corresponds to the type of waste. For any other products or
materials, approval must be obtained from the dealer or head-office in order for
the conditions of the guarantee to remain valid.
The different types of granulator are designed so that maintenance and cleaning
can be carried out quickly and simply, both during routine maintenance as well
as when changing colour or material.
All servicing work should be carried out by a person with technical training or
corresponding professional experience. The manual contains instructions for
both handling and servicing the granulator. Chapter 7, which contains servicing
instructions, is intended for service engineers. Other chapters contain
instructions for the daily operator.
Delivered with the granulator are a manual, tool kit and touch-up paint.
Any modifications, changes, or rebuilding of the granulator must be approved
by CONAIR MARTIN in order to avoid personal injury and damage to
machinery and to ensure that the documentation remains correct.
If you have any questions, please contact your local dealer or our head-office.