NETGEAR GS752TP, GS728TPP manual EAP Statistics,  To display a EAP Statistic

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

Use the buttons at the bottom of the screen to perform the following actions:

•Click CLEAR to clear all the counters. This resets all statistics for this port to 0.

•Click REFRESH to display the most current statistics.

EAP Statistics

Use the EAP Statistics screen to display information about EAP packets received on a specific port.

To display a EAP Statistic:

1.Select Monitoring > Ports > EAP Statistics. The following screen displays:

2.Select the interface for which data is to be displayed.

This can be done by either clicking the check box by the required port or by entering the port name in the Go to Interface field and clicking Go.

The following table describes the EAPOL and EAP statistics displayed.

•Frames Received. The number of valid EAPOL frames received on the port.

•Frames Transmitted. The number of EAPOL frames transmitted through the port.

•Start Frames Received. The number of EAPOL start frames received on the port.

•Logoff Frames Received. The number of EAPOL log-off frames that have been received on the port.

•Last Frame Version. The protocol version number attached to the most recently received EAPOL frame.

215