NETGEAR GS728TPP, GS752TP IPv6 Network Neighbors,  To view the IPv6 Network Interface Neighbors

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

IPv6 Network Neighbors

To view the IPv6 Network Interface Neighbors:

Select System > Management > IPv6 Network Neighbors. The following screen displays:

Properties of each neighbor are displayed, as described below:

•IPv6 Address. Specifies the IPv6 address of the neighbor interface.

•MAC Address. Specifies the MAC address associated with the neighbor interface.

•IsRtr. Indicates whether the neighbor is a router. If the neighbor is a router, the value is True. If the neighbor is not a router, the value is False.

•Neighbor State. Specifies the state of the neighbor cache entry. The following are the states for dynamic entries in the IPv6 neighbor discovery cache:

•Reach. No more than ReachableTime milliseconds have elapsed since confirmation was received that the forward path to the neighbor was functioning properly. When in REACH state, the device takes no special action as packets are sent.

•Stale. More than ReachableTime milliseconds have elapsed since a confirmation was last received that the forward path was functioning properly. While in STALE state, the device takes no action until a packet is sent.

•Delay. More than ReachableTime milliseconds have elapsed since a confirmation was last received that the forward path was functioning properly. A packet was sent within the last DELAY_FIRST_PROBE_TIME seconds. If no confirmation is received within DELAY_FIRST_PROBE_TIME seconds of entering the DELAY state, the device sends a neighbor solicitation message and changes the state to PROBE.

•Probe. A confirmation is actively sought by repeatedly sending neighbor solicitation messages every RetransTimer milliseconds until a confirmation is received.

•Last Updated. Elapsed time since the address was last confirmed as reachable.

31