NETGEAR GS752TP, GS728TPP manual Auto-VoIP Configuration,  To enable Auto-VoIP

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

Auto-VoIP Configuration

Auto-VoIP automatically makes sure that time-sensitive voice traffic is given priority over data traffic on ports that have this feature enabled. Auto-VoIP checks for packets carrying the following VoIP protocols:

•Session Initiation Protocol (SIP)

•H.323 (Prioritize only signaling packets)

•Skinny Call Control Protocol (SCCP)

All three protocols are checked during the signaling, call identification stage. Once the VoIP call is established, only the SIP and SCCP protocols are checked. This feature supports up to 48 bidirectional VoIP calls.

VoIP frames that are received on ports that have the Auto-VoIP feature enabled are assigned to queue 3.

Auto-VoIP and QoS CoS/DiffServ mode features can co-exist and be activated at the same time. If both features are active at the same time on the same port, the manual QoS assignment might override the VoIP QoS assignment.

To configure the Auto-VoIP parameters, use the Auto-VoIP configuration screen. The Interface column specifies all the configurable Auto-VoIP interfaces. The Traffic Class displays the traffic class on which the received VoIP frames are marked.

To enable Auto-VoIP:

1.Select Switching > Auto-VoIP. The following screen displays:

90