GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

all valid Community Names or the set request is rejected. If you select Disable, the Community Name becomes invalid.

3.Click ADD.

Configuration changes take effect immediately.

Trap Configuration

This screen displays an entry for every active Trap Receiver.

To configure SNMP trap settings:

Select System > SNMP > SNMP V1/V2 > Trap Configuration. The following screen displays:

To add a host that receives SNMP traps:

1.Enter trap configuration information in the following fields:

•Recipients IP. The address in x.x.x.x format to receive SNMP traps from this device.

•Version. The trap version used by the receiver.

•SNMP v1. Uses SNMP v1 to send traps to the receiver.

•SNMP v2. Uses SNMP v2 to send traps to the receiver.

•Community String. The community string for the SNMP trap packet sent to the trap manager. This community string can be up to 16 characters and is case-sensitive.

2.Click ADD.

Configuration changes take effect immediately.

To modify information about an existing SNMP recipient:

1.Select the check box next to the recipient, and change the desired fields.

51

Page 50 Page 52
Page 51
Image 51
NETGEAR GS752TP, GS728TPP Trap Configuration,  To configure Snmp trap settings,  To add a host that receives Snmp traps
Page 50 Page 52
Top Page Image Contents