NETGEAR GS752TP, GS728TPP manual TACACS+ Server Configuration

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

2.In the Key String field, specify the authentication and encryption key for TACACS+ communications between the switch and the TACACS+ server.

The valid range is 0–128 characters. The key must match the key configured on the TACACS+ server.

3.In the Connection Timeout field, specify the maximum number of seconds allowed to establish a TCP connection between the switch and the TACACS+ server.

The valid range is 1–30 seconds.

4.Click APPLY to update the switch with the RADIUS Accounting server settings.

TACACS+ Server Configuration

Use the TACACS+ Server Configuration screen to configure up to five TACACS+ servers with which the switch can communicate.

To configure TACACS+ server settings:

1.Select Security > Management Security > TACACS+ > TACACS+ Server Configuration link.

The following screen displays:

2.In the TACACS+ Server field, enter the IP address of the server to add

3.In the Priority field, specify the order in which the TACACS+ servers are used. A value of 0 is the highest priority.

4.In the Port field, specify the authentication port number through which the TACACS+ session occurs.

The default is port 49, and the range is 0–65535.

164