Liebert EM manual Configure Thresholds

Getting Started With the Web Interface

5.4.2Configure Thresholds

You may set thresholds that will trigger alerts for power, voltage, current and temperature sensors in each power strip.

Power tab

Links to set thresholds

Select a power strip

To do this:

•In the left side of the Power Data window, shown above, select a power strip (Port 1 or 2).

•Click on one of the blue links—Power, Voltage, Current or Temperature—in the right side of the window. This opens a configuration window, as shown below.

Refresh

Critical & Warning limits

Rearm

Graph (see Section 5.4.3)

•Use the Critical and Warning text boxes to set thresholds that will trigger alerts (see 4.4.3 - MP Advanced Power Strip Thresholds for more information).

•In the Rearm box, you may enter a value to define how much the sensor’s reading must change beyond the threshold in either direction before its state is changed. This feature prevents the unit from generating excessive alerts if a sensor’s value repeatedly moves slightly above or below a threshold.

•At any time, click on the Refresh button to update the sensor’s Status and Current Value.

•Click on the Apply button to keep your changes. (Or click Reset to cancel the changes.)

•From this window, you may click on the Graph button, shown above, to view line graphs of power strip data, as described in the next section, 5.4.3 - View Power Strip Graphs.

24