Getting Started With the Web Interface
5.4.4Create or Change Port Names
The Port Names feature allows you to create a name to help identify a serial port. This name is dis- played throughout the Web interface and in notifications sent by pager or
To access the Port Names window, log in (see 5.1 - Open the Web Interface and Log In) and:
•Click on the Power tab at the top of the Web interface, as shown below.
Power tab
Port names
Port Names button
•Click on the Port Names button on the left side of the window. The right side of the window has text boxes for the two serial ports, Port 1 and Port 2, that correspond to the Serial 1 and Serial 2 ports on the back of the unit. For example, Port 1 corresponds to any serial device connected to the Serial 1 port.
•Click in the appropriate text box and enter a name. The name cannot exceed 12 characters in length. (To rename a port, select all characters and enter a new name.)
•To delete a name, select all characters and press the Delete key.
•Click on the Apply button to keep your changes. (Or click Reset to cancel the changes.)
•Click the Close button to exit the Port Names window and return to the Power Data window.
26