.
How to change a programmedrecording (TIMER)1.
1.Switch on the TV.If required, select the pro-
gramme number for the video recorder.
2.
2.Press .The main menu will appear.
3.
3.Select 'TIMER' with .Then press
.
4.
4.Select ONCE, DAILY, or WEEKLY recording
with .Then press .
5.
5.Select a TIMER block with .(The flashing
number indicates an empty TIMER block.)
6.
6.Press to delete information and input
correct information with or .
7.
7.To end, press .
8.
8.Switch off with .
Problems and solutions for pro-grammed recordingsSTANDBY/ON yy
STATUS/EXIT
0..9
LCKB
CLEAR
0..9
B1LCKB
B1
LC
KB
MENU
12 EN
ONCE
TIMER - 1 2 3 4 5 6 7 8 -
SELECT TIMER NUMBER
END=EXIT
Error message:' ' will flash in the video
recorder display
•No cassette was inserted.Insert a cassette and
switch off the video recorder using
•A cassette was inserted with the security tab
removed.
Undo the erase protection (chapter 'Manual
Recording', section 'Preventing accidental erasing of
cassettes') or insert a different cassette.
Cassette is ejected during recording
•The end of the tape was reached during recording.
The video recorder does not react
•While a programmed recording is being made, you
cannot operate your video recorder manually.If you
want to cancel the programmed recording, press
.
•The end of the tape was reached during recording.
C/AA
STANDBY/ON yy
VR130/39(EN).qxp* 02.3.15 8:11 PM Page 12