Philips VR 130, VR139 Manual TV channel search, Using the satellite receiver, Automatic Tuning

7.Use B 1 to select 'ON' (Decoder switched on).

8.To end, press STATUS/EXIT .

How can I switch off the decoder?

Use B 1 to select 'OFF' (Decoder switched off).

The decoder has now been allocated to this TV channel.

Manual TV channel search

In some cases it can occur that all of the TV channels are not found and saved during the first installation. In this case, the missing or coded TV channels must be searched for and stored man- ually.

1.Switch on the TV set. If required, select the programme number for the video recorder.

2.Press

MENU

.

The main menu will appear.

3.Use

to select 'TUNER SET UP'.

K B

L C

Then press

.

B 1

4.Use

to select 'MANUAL TUNING'.

K B

L C

Then press

.

B 1

Select 'SYSTEM' with

K B

L C

5.

.

MANUAL TUNING

→SYSTEM

[ L ]

PROG.

P55

CHANNEL

055

DECODER

[OFF]

SKIP

[OFF]

SELECT K L CHOOSE B

END=EXIT

6.Select 'L' or 'BG' with

.

B 1

Select 'PROG.' with

K B

L C

7.

.

. Then press

B 1

8.With

or

, select the desired

K B

L C

0..9

programme number that you want to use for the TV channel, e.g. 'P01'. Then press B 1 .

What is a special channel?

TV channels are transmitted in certain pre- defined frequency ranges. These ranges are divided into channels.

A specific frequency/channel is assigned to each TV station.

Certain frequency ranges are specified as spe- cial channels (hyperband channels).

9.Select 'CHANNEL' with K B L C , and con- firm with B 1 . Then enter the desired chan- nel with 0..9 .

If you set 'SKIP' on, you can skip the channels when you press P+ P– .

I don't know the channels for my TV stations

In this case, press K B L C in 'CHANNEL' to start the automatic channel search. A changing channel number will appear on the TV screen.

Continue the automatic search until you have found the desired TV channel.

10.Save the TV channel with B 1 .

11.To search for other TV channels, begin again at step 5.

12.To end, press STATUS/EXIT .\

Using the satellite receiver

Satelite channels from a satellite receiver (con- nected to the scart socket AV2(DECODER) ) are received on the video recorder on programme number 'AV2' with 0.0.2.

You should select the satelite channels to be received by the satellite receiver directly on the receiver itself.

Automatic Tuning

During installation, all available TV channels are searched for and saved. If the channel assign- ments of your cable or satellite TV provider change or if you are re-installing the video recorder, e.g. after moving house, you can start this procedure again. This will replace the TV channels already saved with the new ones.

1.Switch on the TV. If required, select the pro-

gramme number for the video recorder.

2.Press MENU . The main menu will appear.

3.Select 'TUNER SET UP' with							K B		L C		and
confirm with				.
		B 1
4.Select 'AUTO TUNING' with										and
						K B		L C
confirm with					.
			B 1
			PLEASE WAIT
	START				FINISH
	❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚

5.The automatic TV channel search starts. This allows the video recorder to save all available TV channels. This procedure may take sever- al minutes.

6.When the TV channel search is complete, 'COMPLETED' will briefly appear on the TV screen.

6 EN