4. Installing your video recorder
Preparation for use
This chapter shows you how to prepare the video recorder use. The video recorder automati- cally seeks out and stores all available TV chan- nels.
1.Select the desired language for the
menu by pressing 
.
'Aim' correctly
In the following sections, you require the remote control for the first time. When using, always aim the front of the remote control at the video recorder and not at the TV.
Connecting additional devices
After you have connected additional devices (satellite receiver, etc.) through the aerial cable, switch them on. The automatic channel search will recognise them and save them.
2.Press MENU .
What is an on-screen menu?
The
3.Confirm with P+ .
The automatic TV channel search starts.
| PLEASE WAIT |
START | FINISH |
❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚
The video recorder does not find any TV channels during the search
*Select channel 1 on the TV. Can you see the saved TV channel on the TV?
If not, check the cable connection of the aerial (aerial socket), video recorder, TV.
*The video recorder searches the entire fre- quency range in order to find and save the largest possible number of TV channels. It is possible that the TV channels in your country are broadcast in a higher frequency range. As soon as this range is reached during the search, the video recorder will find the TV chan- nels.
4.'TIME' and 'DATE' will appear on the TV screen.
TIME
DATE
END=EXIT
5.Check 'TIME'. If required, please change the time with the number buttons 0..9 .
6.Check if the displayed settings for 'DAY', 'MONTH' and 'YEAR' are correct.
7.When all information is correct, save by pressing STATUS/EXIT .
Satellite receiver
If you are connecting a satellite receiver, please read the section 'Using the satellite receiver'.
Decoder
If you are connecting a decoder, you must install it as described in the next section.
The preparation for use is now complete.
Decoder allocation
Some TV channels transmit encoded TV signals which can only be viewed with a purchased or rented decoder without disturbances. You can con- nect such a decoder to this video recorder. The fol- lowing function will automatically activate the con- nected decoder for the desired TV channel. 1.Switch the TV on. If applicable, select the
programme number for the video recorder operation.
2.Use | K B |
|
| L C | or | 0..9 | to select the TV | ||||||
channel which you would like to allocate the | |||||||||||||
decoder to. |
|
|
|
| |||||||||
3.Press |
| . The main menu will appear. | |||||||||||
MENU | |||||||||||||
4.Use |
|
|
|
|
|
|
| to select 'TUNER SET UP'. | |||||
K B |
|
| L C | ||||||||||
Then press |
|
|
| . |
|
|
|
| |||||
B 1 |
|
|
|
| |||||||||
5.Use |
|
|
|
|
|
|
| to select 'MANUAL TUNING'. | |||||
K B |
|
| L C | ||||||||||
Then press |
|
|
| . |
|
|
|
| |||||
B 1 |
|
|
|
| |||||||||
6.Use |
|
|
|
|
|
|
| to select 'DECODER'. | |||||
K B |
|
| L C | ||||||||||
|
|
|
| ||||||||||
| MANUAL TUNING |
|
| ||||||||||
|
|
| SYSTEM | [ L ] |
|
| |||||||
|
|
| PROG. | P55 |
|
| |||||||
|
|
| CHANNEL | 055 |
|
| |||||||
|
| →DECODER | [OFF] |
|
| ||||||||
|
|
| SKIP | [OFF] |
|
| |||||||
| SELECT K L CHOOSE B |
|
| ||||||||||
| END=EXIT |
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5 | EN |
|
