58 Using the System Setup Program
Command Line Interfaces for Setup options
The SETUP menu provides setup options through the system configuration
utility (syscfg), included in the Dell OpenManage Deployment Toolkit
(DTK).
Users can use the utility as following:
To change the SETUP option thru D4 token:
./syscfg –t=D4_token_id
Example:
./syscfg -t=0x002D to enable NIC1
To check token active status:
./syscfg --istokenactive=D4_token_id
Example:
./syscfg --istokenactive=0x002D to check the token active status of NIC1
To di rec tly ch ang e th e S ETU P option thru BMC memory:
./ipmitool raw <command> <data>
Example:
./ipmitool raw 0xc 1 1 3 10 106 42 120 to set IP address of BMC LAN port
as 10.106.42.120