Dell C5220 owner manual Hard Drives, Removing a 2.5-inch Hard Drive

Hard Drives

The following are examples showing the installation and removal procedures for the 2.5-inch and the 3.5-inch hard drives.

Removing a 2.5-inch Hard Drive

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

NOTE: Mixing SATA and SAS hard drive on the 2.5 and 3.5-inch hard drive board is not supported.

1Remove the sled from the system. See "Sled Configuration" on page 61.

2Remove the hard drive from the sled docking bay.

3Select the hard drive to replace and remove the four hard drive bracket screws securing it underneath the sled.

Bottom of sled

Top of sled

4Remove the hard drive from the sled docking bay.

Installing System Components

69